EV Charger Cable Retractor — 3.5 m, Self-Locking
$159.00
Why Choose Our Cable Retractor?
Self-Locking Cable Control
Pull down only the tether length you need and pause to lock it. Pull again to release, then guide the tether back under control after charging.
Wall or Ceiling. Your Choice.
Select Wall / Side Mount for a vertical wall or post. Select Ceiling / Top Mount for the underside of a ceiling, beam or overhead shelf. The retracting mechanism is the same.
Self-Locking Retraction. Less Drag. Less Tangle.
The retractor helps lift excess charging cable off the floor, reducing dragging and tangling. After charging, guide the tether back as it retracts to keep your charging area neat and organized.
High-Density Braided Tether
Built with a dense, multi-strand weave, the tether offers abrasion resistance and tensile strength for everyday charging cable management.
Compatibility & Fitment
✓Compatible Setups
- Tesla NACS, J1772 and Type 2 AC charging cables.
- Model S, 3, X, Y, Cybertruck and other EVs, subject to the cable-fit checks above.
- Confirm cable diameter, supported weight, mounting surface and cable route before installation.
×Do Not Install When
- The clamp cannot securely hold the cable jacket.
- No solid mounting surface is available.
- The cable route would pull continuously on the vehicle connector.
Specifications
| Product Name | EV Charger Cable Retractor |
|---|---|
| Tether Length | 3.5 m |
| Pull Force | 3 kgf |
| Tether Construction | High-density, multi-strand braided tether |
| Mounting Options | Side Mount for a vertical wall or post; Ceiling Mount for an overhead surface. Select the version that matches your setup. |
| Main Function | Supports excess charging cable to help reduce floor dragging and tangling. |
| Package Contents | Cable tether, iron mounting plate and screws. |
Charging cable and charger are not included. Position the retractor to support cable slack without applying continuous force to the connected charging plug.
Frequently Asked Questions
Does it fit every Tesla model and year?
It is vehicle-independent and can be used with Model S, 3, X, Y and Cybertruck. Confirm cable outside diameter, supported weight, mounting position and cable route before ordering.
Does it work with NACS, J1772 and Type 2 cables?
Yes in principle, because the unit supports the outside of the cable and carries no charging current. Compatibility still depends on cable diameter, weight and routing.
Will it change charging speed?
No. This is a mechanical cable-management accessory. Charging performance remains determined by the charger, circuit, cable and vehicle.
Should it pull on the charging plug while connected?
No. Position the unit and clamp so it supports cable slack without applying continuous upward or sideways force to the plugged-in connector.
Which mounting version should I choose?
Choose Wall / Side Mount for a vertical surface. Choose Ceiling / Top Mount for an overhead surface.
Can I mount it outdoors?
Install only where the unit and hardware are protected from conditions beyond their verified rating. Use a dry, structurally sound mounting surface.
What is included?
One cable retractor with tether, one mounting plate for the selected version and a set of mounting screws. The charging cable and charger are not included.
Related products
Reviews
There are no reviews yet.